I’m setting up with HA and zigbee smart bulbs. I’ve got a few automations already set up, such as turning on a bunch of lights in the morning and turning most of them off again at night.

All these lights still have physical switches. I don’t want to take those switches out for lots of reasons, and putting smart switches there seems like overkill when the bulbs are already smart. What are people doing with their physical light switches to ensure that they don’t get flipped?

Ideas I’ve had:

  • some kind of physical plastic covering that fits snugly around it. I’d probably do this if I had a 3d printer, but I don’t. Maybe someone sells a thing like this? More just a reminder not to touch them.
  • Carefully paint the switches a different color (perhaps the HA color scheme?). Again, basically just a reminder. This especially makes sense with a few multi-switch plates where some of the connected lights are automated and some are intentionally left manual.
  • Entirely replace the plate with a smart switch? Besides incurring a nontrivial cost and being a bunch of work to install, this won’t even help me with the aforementioned multiswitch plates. I don’t want all my lights automated.

Other ideas?

  • throw4w4y5@sh.itjust.worksEnglish
    1·
    1 year ago

    leave the switches in the wall but bridge the cable so it stays on irrespective of the switch position. or join the cables behind it with some terminal block

    • IsoKiero@sopuli.xyzEnglish
      5·
      1 year ago

      And then you can’t easily cut power from the fixture if you need to replace the bulb or change the whole lamp altogether. I wouldn’t recommend doing this, especially if you don’t have a socket on the ceiling to remove the fixture.