Are they Bluetooth headphones? If so, check the protocols supported by your phone, and by the headphones, e.g. aptX vs LDAC vs SBC. It’s possible that it’s not a “downgrade” on the new phone, but rather an upgrade to a better protocol, but unfortunately not one compatible with your headphones, so you end up using a low quality fallback.

You may also want to check your settings, and see if you can select a specific protocol. Sometimes a lesser protocol is chosen by default, if the better protocol uses more battery. This may be available to you in the phone settings, or as an option in an app for the headphones (e.g. my Anker Soundcore app allows choosing between two protocols).

I think that applies to the others as well, except in some cases when they are tuned to the same fundamental, e.g. Bb Trumpet, BBb Tuba. But tubas commonly come in C, F, and Eb as well (trumpet variants also exist, but are less common).

Because of the rotary valves and trigger? Or for some other reason?

If that’s the only difference you’re calling out, it’s worth noting rotary valves and triggers show up on other instruments as well. In particular, tubas often have rotary valves, and it’s not uncommon to see trigger valves on trombones.

Having played both piston valves and rotary, the difference is negligible.

Not sure what landscape features you’re looking for, but I’ve been pretty happy with Voyager. I switched from liftoff/jerboa after lemmy.ml took the 0.19 update and they broke. It’s been good enough that I think even if the others hadn’t broken, I’d still choose Voyager over them.

grep -r string .

The flag should go before the pattern.

-r to search recursively, . refers to the current directory.

Why use . instead of *? Because on it’s own, * will (typically) not match hidden files. See the last paragraph of the ‘Origin’ section of: https://en.m.wikipedia.org/wiki/Glob_(programming). Technically your ls command (lacking the -a) flag would also skip hidden files, but since your comment mentions finding the string in ‘any files,’ I figured hidden files should also be covered (the find commands listed would also find the hidden files).

EDIT: Should have mentioned that -R is also recursive, but will follow symlinks, where -r will ignore them.

I noted in another comment that SearXNG can’t do anything about the trackers that your browser can’t do, and solving this at the browser level is a much better solution, because it protects you everywhere, rather than just on the search engine.

Routing over Tor is similar. Yes, you can route the search from your SearXNG instance to Google (or whatever upstream engine) over Tor, and hide your identity from Google. But then you click a link, and your IP connects to the IP of whatever site the results link to, and your ISP sees that. Knowing where you land can tell your ISP a lot about what you searched for. And the site you connected to knows your IP, so they get even more information - they know every action you took on the site, and everything you viewed. If you want to protect all of that, you should just use Tor on your computer, and protect every connection.

This is the same argument for using Signal vs WhatsApp - yes, in WhatsApp the conversation may be E2E encrypted, but the metadata about who you’re chatting with, for how long, etc is all still very valuable to Meta.

To reiterate/clarify what I’ve said elsewhere, I’m not making the case that people shouldn’t use SearXNG at all, only that their privacy claims are overstated, and if your goal is privacy, all the levels of security you would apply to SearXNG should be applied at your device level: Use a browser/extension to block trackers, use Tor to protect all your traffic, etc.

They are explicitly trying to move away from Google, and are looking for a new option because their current solution is forcing them to turn off ad-blocking. Sounds to me like they are looking for a private option. Plus, given the forum in which we are having the discussion (Lemmy), even if OP is not specifically concerned with privacy, it seems likely other users are.

As for cookies, searxng can’t do any more than your browser (possibly with extensions) can do, and relying on your browser here is a much better solution, because it protects you on all sites, rather than just on your chosen search engine.

“Trash mountain” results is a whole separate issue - you can certainly tune the results to your liking. But literally the second sentence of their GitHub headline is touting no tracking or profiling, so it seems worth bringing attention to the limitations, and that’s all I’m trying to do here.

You mean between their instance and the final search engines? Or between them and a public instance of searxng?

In either case, I’m not sure it buys you anything in terms of privacy you wouldn’t get by using the VPN and going directly to the search engines.

It looks like a few people are recommending this, so just a quick note in case people are unaware:

If you want to avoid being tracked, this is not a good solution. Searxng is a meta search engine, meaning it is effectively a proxy: you search on Searxng, it searches multiple sites and sends all the results back to you. If you use a public instance, you may be protected from the actual search engine*, because many people will use the same instance, and your queries will be mixed in with all of them. If you self host, however, all the searches will be your own - there is then no difference between using Searxng and just going to the site yourself.

*The caveat with using the public instances is while you may be protected from the upstream engine, you have to trust the admins - nothing stops them from tracking you themselves (or passing your data on).

Despite the claims in their docs, I would not consider this a privacy tool. If you are just looking for a good search engine, this may work, and it gives you flexibility and power to tune it yourself. But it’s probably not going to do anything good for your privacy, above and beyond what you can get from other meta search engines like Startpage and DuckDuckGo, or other “private” search engines like Brave.

This is approximately what I do as well, and would highly recommend. The one caveat I would add is while you are researching things you might want to do, take note of the subset of things you most want to do, and make sure you know what days/times they are open, if you need to book in advance, etc. I am very against having a hard schedule, but I also don’t want to travel somewhere only to miss the one thing I was really looking forward to because I decided “I’ll do that tomorrow,” only to find out it was closed the next day.

An additional pro-tip: Make your first list of things you might want to do ahead of time, and name it after the place you are going, e.g. “New York.” Then while you’re traveling, make a second list of “favorites”, e.g. “New York Favorites.” Keep track of all the restaurants, activities, view points, etc that you enjoyed using that second list. Then whenever someone asks for recommendations for a particular location, you can just send them your favorites list.

They do care. They’re trying to find a way to stop it. That’s the point of the article. It’s the first sentence:

The Danish government will seek to “find a legal tool” that would enable authorities to prevent the burning of copies of the Koran in front of other countries’ embassies in Denmark, Foreign Minister Lars Lokke Rasmussen told the national broadcaster DR on Sunday.

it has its flaws.

Yep yep. I was aware of some of what you pointed out - I think this might be a “perfect is the enemy of good” scenario, though. GitHub alone accounts for over 84% (based on the awesome-selfhosted-data repo):

$ grep -r 'source_code_url' | cut -d ' ' -f 2 | cut -d '/' -f 3 | sort | uniq -c | sort -rn | head -n 15
   1068 github.com
     36 gitlab.com
      7 git.mills.io
      6 sourceforge.net
      6 framagit.org
      4 www.atlassian.com
      4 codeberg.org
      3 git.drupalcode.org
      3 git.cloudron.io
      2 repos.goffi.org
      2 git.tt-rss.org
      2 git.sr.ht
      2 cvsweb.openbsd.org
      1 yetishare.com
      1 www.wiz.cn

$ python -c "print($(grep -r 'source_code_url' . | grep github.com | wc -l) / $(ls -1 | wc -l))"
0.8422712933753943

Adding in gitlab gets you to 87%:

$ python -c "print($(grep -r 'source_code_url' . | grep -i -e github.com -e gitlab.com | wc -l) / $(ls -1 | wc -l))" 0.8706624605678234

Also popularity != quality.

True, but a thriving community generally means more resources, guides, etc, which can be important, especially for self-hosted solutions.

In any case, the project is great, and much appreciated. Additionally, the enriched html version looks fantastic, and exposes most of the metadata* I’d want to see, regardless of how it’s sorted.

*One other item to track, that I thought about after making my previous comment - number of contributors. It gives an additional data point on the size of the community, as well as an idea of how many people can be hit by busses before the continued development of the project gets called into question.

I would imagine the source for most projects is hosted on GitHub, or similar platforms? Perhaps you could consider forks, stars, and followers as “votes” and sort each sub category based on the votes. I would imagine that would be scriptable - the script could be included in the awesome list repo, and run periodically. It would be kind of interesting to tag “releases” and see how the sort order changes over time. If you wanted to get fancy, the sorting could probably happen as part of a CI task.

If workable, the obvious benefit is you don’t have to exclude anything for subjective reasons, but it’s easier for readers of the list to quickly find the “most used” options.

Just an idea off the top of my head. You may have already thought about it, and/or it may be full of holes.

At 1:30 in that second video, he shows that YouTube already converts dot zip domains, even in old comments that predate the domain’s existence. At 3:19, he shows/mentions Twitter, Reddit, Facebook, and LinkedIn. I would consider those major platforms. And keep in mind, it only takes one person downloading one file to cause major damage - the LMG hack was due to someone downloading and trying to open a fake PDF that was sent via email: https://youtu.be/yGXaAWbzl5A.

So yes, not everything does or will auto convert the links, but I think you are underestimating the potential for issues here.

See https://youtu.be/GCVJsz7EODA and https://youtu.be/V82lHNsSPww

There are a few problems, but I believe the biggest issue is that .zip and .mov are valid and common file extensions, and it’s common for people to write something like ‘example dot zip’ or ‘attachment dot mov’ in emails, tweets, etc. Things like email clients have features where they automatically convert text that looks like a web address into clickable links. So now, retroactively, all those emails etc suddenly have a link, where they used to just have text, and the domains that are equivalent to those previously benign file names are being purchased by nefarious actors to exploit people unaware of the issue.

I like pass, It’s just a wrapper around standard tools - gpg encrypted files in a directory, with git for version control. You can organize the subfolders however you’d like, and store whatever you want in them. You can sync the files across systems however you’d like - copy/paste, rsync, network drive… You can even go as far as to install a git server, e.g. gitlab, and clone, push, and pull into password synchronization bliss.