Is it possible to send the hint from OPNsense itself?
Yes, to me it sounds like you’re already getting a big enough prefix from your ISP (all devices getting a /64), but you’ll have to request a bigger prefix from OPNsense. I believe it should give you the options to do this when you set the IPv6 mode to DHCPv6 on OPNsense, but I can’t say if your ISP router will handle it.
I have also added all Cloudflare IPs in Jellyfin’s known proxies
You should only need to add the IP of the last proxy before reaching Jellyfin, which would be Caddy.
If you can’t get the VPS to work, alternatively there’s Cloudflare but last I checked streaming was a little out of their free terms. With it, you should just have to set your AAAA record and make the cloud orange, that way Cloudflare will proxy it, and IPv4 will work. There’s also Cloudflare tunnels which lets you host websites without port forwarding anything.
I can’t wait for it to be added to activate-linux!
I believe 5.6.0 was in Debian testing for almost a month too.
In theory PWAs can be configured to run offline, whether they’re doing that I don’t know.
The desktop app looks like it’s electron though.
I searched it up:
It seems the smaller tube is pressurised, the larger bulb is under a vacuum. Some of the other diagrams also show a getter in the bulb, so it’s a proper vacuum tube level vacuum.
IEEE Spectrum says this:
Currently, he says, the new discs have a writing speed of about 100 milliseconds and an energy consumption of microjoules to millijoules.
Idk if that means the full 200TB in 100ms, or a bit per 100ms, but there is a number out there I suppose.
I doubt this will be any use, but my Telstra 4G has a public IPv6.
Cloudflare Tunnels will let you proxy any port, as long as it’s HTTP(S) or SSH, even on free tier.
Also I believe there’s a thing now for proxying other ports anyway on free tier without tunnels, but I haven’t looked too much into it.
Just thought Kiwix seems like it’ll be handy here, it lets you download Wikipedia and some other websites, and they have an Android app to view them.
(They have a web version too, which I actually selfhost for if the world ends or something /s)
Here’s the actual HACS add-on: https://github.com/richardzone/homeassistant-dht
The one linked before looks to just be a GPIO one, not a DHT one.
That’s what he did, but with a home assistant yellow as the gateway.
The video is about smart devices that are poorly designed and/or rely on cloud infrastructure being dumb. Jeff also wants smart devices that will literally only talk to home assistant, and will still work fine if home assistant is offline (like a light switch will still work if the server is down).
if you want to use different SSID for different VLAN
With newer versions of the controller you can actually use PPSK for a different VLAN per password (same SSID), but at the moment you’d be stuck using WPA2.
Yeah mine has a text field that says ‘Auxiliary Parameters’ inside the ‘Advanced Settings’
System Settings > Services > SMB (/ui/services/smb):
Shares > Edit SMB:
I am slightly out of date with 22.12.3 though, so maybe they removed it?
I see you’ve solved it anyway though.
Have you set any auxiliary parameters? I think there a section for the SMB service, and one in each of the shares.
I had one become invalid, which would make truenas not save settings.
my vacuum is defying discovery because of UDP crossing the subnets.
This is likely more to do with broadcast addresses. The vacuum would be broadcasting it’s presence on its own subnet’s broadcast address (x.x.151.255), but homeassistant is only listening on it’s subnet broadcast address (x.x.150.255). As routers don’t usually let broadcasts cross subnets, I don’t think there’s a way for the host or VM to listen for them like this.
You could setup vlans and hopefully VirtualBox supports passing through vlans, so that homeassistant would have multiple interfaces. Or like other people have said, just increase the size of the home assistant subnet so that it’ll overlap with the IoT subnet and the broadcast address would be the same, but some devices might not like responding to a device that’s on a different subnet to them, without a router.
That’s true, but because of that you can get Cisco certifications, which could be helpful if you end up in an network related job. Those certifications will also give you a lot of knowledge of how networks work. (I’m currently completing a CCNA, and quite enjoy it)
A few other companies also clone the Cisco CLI, so there’s that too. I wouldn’t touch the Web UI if it has one though.
If the HOA’s router supports UPnP/NAT-PMP/PCP then you might be able to use that to get some ports forwarded.