Seems like nextcloud is the weak link, can you access them another way? Through a network share?

You’ll also likely need a few torx bits

Also worth noting that pfsense was ready and intending to knowingly ship a broken and insecure wireguard integration

Yup that’s exactly correct. I will say one of the benefits of the AC finity is the alarm. If the temp gets too high it beeps to let you know

https://acinfinity.com/closet-room-fan-systems/

They have a lot of products, including other fans and thermostats. I’ve had their media cabinet fans running 24/7 for 4-5 years now with no problems. Highly recommend it.

Otherwise you could use something like this and a standard 12v power adapter https://www.tindie.com/products/mmm999/dc-12v-four-wire-thermostat-pwm-pc-cpu-fan/

When my pixel 5a decided to stop using the screen, I was able to do a full phone backup using the OTG to plug in a keyboard. Ridiculous but was a fun troubleshooting moment

You’ve gotten a lot of good answers, so I’m going to do some out of the box thinking - maybe it will spark a few ideas.

Goal:

• self hosted server on boat

Issues:

• size
• power
• corrosion

So if I were going to do this myself, I’d start with a pelican or other similar watertight container. We don’t want the equipment getting wet, and we don’t want it exposed to the salty air.

I’d probably pick a usff computer, like a dell 9020 or maybe a framework motherboard. To get the storage, I’d get one of these to add multiple sata ports to the computer. Then its a matter of getting a bunch of ssds and powering them. I think the 12v goal is going to be too restrictive, most laptops need 19v to charge, so I’d just bite the bullet and get an inverter. If you’re really tight on power you could go with a pi, but the framework motherboard/usff both use mobile processors, and shouldn’t draw too much while idle.

Any wires that pass though to the case should be made through waterproof bulkheads.

Personally I’d nix the HDMI out requirement. One more port to keep track of and it complicates the self hosting. If you want it for media streaming to a TV then I’d recommend a roku and just run a jellyfin server on the computer. If you want it for server debugging I wouldn’t bother running it out of the case.

The last thing I’d do is figure out cooling. For this I’d probably create some sort of closed loop heat exchanger from the case to either the outside air or the lake/ocean itself. This could be as simple as a pump running water through two radiators, one in the case and the other outside or just dumped overboard. If you know your power usage ahead of time you might be able to get away with a peltier element, dumping the heat outside the case.

I’d probably put this all on its own power system, get a solar panel, battery, inverter, etc. It could even get topped off by the boat’s system if it needs extra juice.

Also whatever you do, I’d figure out a way to ensure you’re giving your system a clean and steady 12v.

“The cause is a new SATA specification which includes the ability to disable power to the hard disk. When you look at the SATA power connection on the back of your hard drive, there are 15 pins that make contact with your power supply. It’s the third pin that delivers a 3.3V signal that disables the drive. What we need to do is prevent that third pin from making contact with the power cable.”

Some hotswap harddrive bays use this feature, definitely more common in enterprise scenarios or in USB HDD enclosures.

I’ve always liked the ultrastar line. Used to be made by HGST and then WD bought them. I’m using specifically the HC530 14tb. The line has a long history of being very reliable enterprise drives.

I’ve bought mine from both goharddrive and serverpartsdeals. Both are reliable resellers of used storage. They’ll warranty the drives for 2 or 5 years depending on which you to with. Prices are ~$130-$150.

Be aware you might need to do the electrical tape over some of the power pins hacks depending on your setup.

Ps. One of the listings for the HC530 on goharddrive or serverpartdeals is incorrectly labels as HC520. Just pay close attention.

As far as raid goes, Raid 10 is currently very popular for its speed and drive failure tolerance. Remember, raid is not a replacement for the 3-2-1 backup rule. Raid has some fault tolerances for bad hard drives, but doesn’t protect against a failed raid card, fire, flood, robber, acts of god, etc.

You can also look into zfs and truenas if you feel inclined. Be aware that if you go with this setup, ecc ram is basically a requirement

Migadu micro tier is $19/year. Great service and has a great privacy policy. Basically unlimited domains. Ive been very happy with them.

https://www.migadu.com/

That’s definitely something to be aware of, but the vdev expansion feature was mergered and will be released probably this year.

Additionally, it looks like the authors main gripe is the current way to expand is to add more vdevs. If you plan this out ahead of time then adding more vdevs incrementally isn’t an issue, you just need to buy enough drives for a vdev. In homelab use this might an issue, but if OP is planning on a 40 drive setup then needing to buy drives in groups of 2-3 instead of individually shouldn’t be a huge deal.

You need to research raid 1,6,10 and zfs first. Make an informed decision and go from there. You’re basing the number of drives off of (uninformed) assumptions and that’s going to drive all of your decisions the wrong way. Start with figuring out your target storage amount and how many drive failures you can tolerate.

Ah ok. I’ve done opnsense and pfsense both virtualized in proxmox and on bare metal. I’ve done the setup both at two work places now and at home. I vastly prefer bare metal. Managing it in a VM is a pain. The nic pass through is fine, but it complicates configuration and troubleshooting. If you’re not getting the speeds you want then there’s now two systems to troubleshoot instead of one. Additionally, now you need to worry about keeping your hypervisor up and running in addition to the firewall. This makes updates and other maintance more difficult. Hypervisors do provide snapshots, but opnsense is easy enough to back up that it’s not really a compelling argument.

My two cents is get the right equipment for the firewall and run bare metal. Having more CPU is great if you want to do intrusion detection, DNS filtering, vpns, etc. on the firewall. Don’t feel like you need to hypervisor everything

So you’re planning to reuse the same hardware that the firewall is running on now, by installing a hypervisor and then only running opnsense in that?

Did you expose your router login page to the open internet? How’d they get access? Why are you chmoding anything to be 777?

I meant the host computer, raspberry pi? I was giving my phone opening time as reference, should have made that more clear.

I’m also on a pixel fold. The performance is fine for me, but I’m hosting home assistant on a VM running on a server with Ethernet to my networking switch.

What are you running home assistant on? On my pixel the app only takes ~2 seconds to open and load on 4G

It’s complicated. I’m no lawyer so take this with a grain of salt, but LLCs don’t offer blanket protection. https://en.m.wikipedia.org/wiki/Piercing_the_corporate_veil

It is possible to go after people directly, and side step the LLC protection in certain cases. Depends how much Nintendo wants to screw these guys.

They are decommisioned datacenter drives, this could be for a variety of reasons (including errors). There are many discussions online about them wiping smart data.

It depends on your use case, I have a few of their drives in a nas specifically for media. I received one bad drive that failed my burn in tests, which they exchange without issue. All of my important files are stored on a seporate ssd based store.

All depends on your risk tolerence and needs.

Serverpartdeals is good. https://www.goharddrive.com/ is another option. Generally slightly more expensive than serverpartdeals, but with better warranty. Both are reputable options